Products > Controllers > Motion 2000™ Hydraulic Control
 
 
1
  Product User Manuals
1 1
 
1 1
 
1 1
 
 
  iControl
  Motion 4000 Traction Control
  Motion 4000MRL
  Motion 2000 Hydraulic Control
  Element Series
1 1
 
1 1
 
1 1
 
 
1 1
 
1 1
 
1 1
 
1 1

Motion 2000 Hydraulic Control

The simple, solid, dependable hydraulic elevator control

The all new Motion 2000 Hydraulic elevator control from MCE is built solidly upon the experience of our customers. Before we began designing, we analyzed years of comments and suggestions. Then made certain we were building the controller that both installers and building owners wanted us to build.

The Motion 2000 supports simplex, duplex, or group control for up to six cars serving up to nine landings and beyond. Motion 2000 design achieves simple interconnectivity and easy field expansion through CAN Bus technology, phone-style connectors and optimized field connection locations.

MCE's Motion 2000 offers the same landing system straight-forward user interface, switch programming, and LCD display as previous generation MCE controllers; minimum learning curve required. To make field programming even easier you can use the hand-held user interface plugged into a controller, COP or cartop CAN connection to access all system parameters. Motion 2000 uses multiple, redundant, self-contained processors for reliable control and constant safety monitoring. Through the CAN Bus, each processor is continuously aware of all system activity.

An optional Ethernet port supports real time connection to MCE iReport for current and historical performance, activity reporting and archival; to MCE iMonitor for remote monitoring and control; to MCE iLobby for eye-pleasing, graphic display of elevator group activity. IDS Lift-NetT monitoring and control application is available using the optional ethernet connection.

Motion 2000 uses a standard, wall-mount enclosure

Motion 2000 specifications

Maximum
Car Speed
200 fpm, 1.0 mps
Configuration
Simplex, duplex, group
Landings
Up to 9 landings and beyond
Motor control
Solid state, Wye/Delta or Across the Line
Landing system
LS-QUTE (solid tape/magnets)
LS-STAN (vanes/switches)
System access
LCD and switches or hand-held user interface
Dispatching
Distributed control of up to 6 cars
Environment
32–104˚ F, 0–40˚ C, humidity non-condensing up to 95%; harsh environment rugged service available (NEMA 4, 4X, 12)
Standard enclosure
34" w x 31.5" h x 9" d (864 x 800 x 280 mm) includes knock-outs
Optional enclosure
(Feature dependent)
36" w x 42" h x 9" d (914 x 1067 x 305 mm) includes knock-outs
Input 208–600 VAC, 50/60 Hz, single or 3-phase

 

 
 
User Manual Product Specification
User Manuals Data sheets


Applications

  • Modernization or new construction
  • Simplex, duplex, or group control
  • Groups up to 6 cars
  • Service up to nine landings and beyond

Benefits

  • Serial COP dramatically reduces traveler wire count
  • Solid state control replaces relays
  • Universal I/O boards provide 16 independent channels; 24-120V AC or DC with built-in current limiting protection
  • Enclosure knock-outs for easy installation
  • Optimized customer connection points
  • Open architecture and simple phone-style connectors allow easy field expansion
  • Programmable using standard MCE on-board display or hand-held user interface
  • Simplified diagnostics using LED status indicators on most customer connections
  • Redundant, self-contained processors monitor safety, increase control reliability, and enhance noise immunity
  • Expandable to four motor/valve combinations using additional interface boards
  • Optional ethernet port for iReport or iMonitor connection (automated email notification through monitoring application)
  • Lift-Net compatible using optional ethernet port

Compliance

  • Latest ASME A17.1 code
  • CSA B44.1-04/ASME A17.5-2004
  • BS EN 81
  • AS 1735
  • EN 12015 and 12016
 
   

back to top

   
©2015 Motion Control Engineering Inc. All rights reserved. Privacy Policy. Legal